Body Armor (12)

Soft Body Armor Panel 5.75″x11.5″ (set of two) verified to fit Condor MOPC Gen II and EXO Gen II-S-M Cummerbund 5.75″X14.5″ (set of two) verified to fit Condor EXO Gen II L-XL Cummerbund 5″x14″ (set of two) verified to fit Chase Tactical MEAC and London Bridge Trading LBT 6094A Cummerbund Lightweight, ultra thin CaliberX™ .19″ thick Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Interior sewn together for longevity TSA Approved Proudly made in the U.S.A Side Panels are sold in a set of two

When you don’t want others to know that you’re wearing body armor, you can’t get more discrete than the Caliber Armor™ Gray Man armor set up.Our Gray Man Carrier is the lightest, most concealable carrier for your CaliberX IIIA Soft Armor Panels on the market.So comfortable and lightweight you won’t even know you are wearing protective body armor.Can be worn under a t-shirt, polo, light jacket or sweatshirt.Easily keep this set up in a backpack for on the go protection.All American Made! Caliber Armor™ Quality! Package Includes: Two (2) 10×12, 8×10 or 11×14 CaliberX™ Ultra Thin Light Weight Panels (only .19″ thin) One (1) Caliber Armor™ Gray Man Concealable Carrier Features: NIJ Tested to Standard-0101.06 Level IIIA and 0101.07(Draft) HG2 Ultra light weight and concealable CaliberX™ IIIA Armor and Gray Man carrier proudly made in the U.S.A Choose from 10×12, 11×14 or 8×10 CaliberX IIIA Soft Armor Panels 4″ Fully adjustable elastic cummerbund 2″ low profile shoulder adjustment Jersey mesh for ultimate comfort and breathability MIL-Spec thread

Concealable and Lightweight Soft Body Armor with Carrier Less weight, less bulk and more comfort CaliberX is only .19″ thin Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Inserts are sewn together for longevity and finished with waterproof cover Minimalist carrier, with breathable jersey mesh material (made in U.S.A) TSA Approved Proudly made in the U.S.A

Concealable and Lightweight Soft Body Armor panel designed for the Condor EXO carrier Less weight, less bulk and more comfort Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Inserts are sewn together for longevity and finished with waterproof cover Body Armor panels proudly made in the U.S.A Carrier not included, to purchase carrier and armor panels together see the Overt IIIA Package Small/Medium: adjustable from 34″-42″ | Large/X-Large: adjustable from 42″-50″ Comes with two panels. One for front and one for back.

Caliber Armor is proud to introduce our IIIA CaliberHX Speed Plate. This thin and light pistol rated plate is made from Ultra High Molecular Weight Polyethylene (UHMWPE). Lightweight Multi-Curve Polyethylene design. Buoyant, multi-shot rated. Waterproof PolyShield finish. Available in two sizes. 10×12 | 8×10 Higher cut/SAPI style shape .29″ thin 10×12 1.33 lbs, 8×10 1lb Made in the USA in the beautiful state of Kentucky Sold individually

Soft Body Armor Panel (available in 8×10, 10×12 and 11×14) Rectangle cut for backpacks Lightweight CaliberX™ (8×10 15oz, 10×12 15.8 oz, 11×14 1lb. 4oz) Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Waterproof Interior sewn together for longevity Proudly made in the U.S.A

Soft Body Armor Panel (available in 8×10, 10×12 and 11×14) 11×14 Panel Fits Most Backpacks on the Market Lightweight CaliberX™ (8×10 15oz, 10×12 15.8oz, 11×14 1lb 4oz) Rated and tested to stop handgun rounds: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2 Water resistant cover Interior sewn together for longevity TSA Approved Proudly made in the U.S.A

Level IV Ceramic/Composite design. Our Level IV body armor plates provide cost-effective, full spectrum, life-saving protection ideal for those responding to volatile active shooter scenarios. The ultimate in durable protection when it is needed most. 9.50 ” x 13.25” MULTI-Curve Body Armor Plate SAPI Cut .93” thick 7.9 lbs Made in the USA Sold individually

Caliber Armor is proud to introduce our Maritime Level III Ultra High Molecular Weight Polyethylene body armor plate. Lightweight Multi-Curve Polyethylene design. Buoyant, multi-shot rated. Waterproof Polyshield polyurea finish. Available in two sizes to accommodate taller or longer torso operators. Medium 9.5 x 12.5 inches | Large 10.5 x 13.5 inches Law Enforcement Style Shooters Cut 1″ thick Medium 3.5 lbs, Large 4lbs Made in the USA in the beautiful state of Kentucky Sold individually

AR550 Level III+ Steel Body Armor Panel Side Plates (available in 6×6 and 6×8 with either standard or PolyShield spall coating) Single bend Special PolyShield Anti-Spall Coating available Rated and tested to: NIJ STD-0101.06 Level III and special threats listed on the new NIJ STD-0101.07 Draft Rifle 2 Proudly made in the U.S.A If you are ordering these for your MOPC or EXO carrier, you will also need the VAS side plate pocket. Click HERE for that product.

AR550 Level III+ Steel Body Armor Panel (available in 8×10, 10×12 and 11×14) Sold in singles Ergonomic Multi-Curve design at no extra cost Special PolyShield Anti-Spall Coating Shooters Cut Rated and tested to NIJ STD-0101.06 Level III and special threats listed on the new NIJ STD-0101.07 Draft Rifle 2 Proudly made in the U.S.A Fitment for Plate Carriers(plate carriers we found that work with our plates): *MOST PLATE CARRIERS WILL HOLD A STANDARD 10X12 PLATE* 221B Tactical QRF Low Visibility Minimalist Plate Carrier Condor MOPC Sentry Plate Carrier Agilite K19 5.11 Tactec Plate Carrier

AR550 Level III+ Steel Body Armor Panel with a SAPI Style Cut. Available in 10×12 only. Sold in singles Ergonomic Multi-Curve design at no extra cost SAPI Style Cut Cut Rated and tested to: NIJ STD-0101.06 Level III and also special threats listed in NIJ STD-0101.07 Draft Rifle 2 Available in Standard Coating or we highly recommend our PolyShield spall coating Proudly made in Louisville, KY U.S.A